| 怎样防止木塑开裂变形？ |
| 添加时间：2019/10/28 13:40:37 浏览次数： |
| 怎样防止木塑开裂变形？ How to prevent cracking and deformation of wood plastic? 1、选用合格的木塑地板和龙骨，现在市场上木塑地板材料层次不齐，注意选择材料密度均匀，木粉粉体较细的材料，木粉和塑料的融合的好，地板的形变量会小，更耐用。 1. Select qualified wood plastic floor and keel. Now, the material level of wood plastic floor in the market is uneven. Pay attention to choose the material with uniform density, fine wood powder and good integration of wood powder and plastic. The shape variable of the floor will be small and more durable. 2、木塑龙骨在铺装过程中，固定膨胀螺丝的间距控制在400-500左右，不宜过大，且安装过程中保证螺丝固定结实，不结实的建议更换；单根龙骨的长度不超过3米为宜；地板接缝处采用双道龙骨以保证地板的固定强度。另外如果施工工人对木塑地板特性不是很了解建议采用钢龙骨，钢龙骨的平整度更高，焊接更结实。 2. During the paving process of wood plastic keel, the spacing of fixed expansion screws should be controlled at about 400-500, which should not be too large. In addition, it is recommended to replace if the screws are fixed firmly and not firm during the installation process; the length of a single keel should not exceed 3M; double keel should be used at the floor joint to ensure the fixation strength of the floor. In addition, if the construction workers are not familiar with the characteristics of wood plastic floor, it is suggested to use steel keel, which has higher flatness and stronger welding. 3、木塑地板铺装时，单根地板的长度不超过2.5米；地板与地板之间接头处需要预留4-5mm的缝隙以保证木塑在后期发生伸缩时有足够空间。 3. When the wood plastic floor is paved, the length of a single floor shall not exceed 2.5m; 4-5mm gap shall be reserved at the joint between the floor and the floor to ensure enough space for the expansion of the wood plastic in the later stage. |
| 上一页 木塑地板不失为室内地板的最佳选择 |
| 下一页 木塑地板在卫浴装修中的应用 |
Copyright © 技术支持：遨游网络