保定木塑加工厂

木塑复合材料的基础为高密度聚乙烯和木质纤维，决定了其自身具有塑料和木材的某些特性。

Wood plastic composite materials for high density polyethylene and the basis of wood fiber, determines its own has some characteristics of plastic and wood.

1) 良好的加工性能

1) good processing performance

　　木塑复合材料内含塑料和纤维，因此，具有同木材相类似的加工性能，可锯、可钉、可刨，使用木工器具即可完成，且握钉力明显优于其他合成材料。机械性能优于木质材料。握钉力一般是木材的3倍，是刨花板的5倍。

Wood plastic composite containing plastic and fiber, therefore, has a similar with wood processing performance, sawing, nailing, plane, use woodworking tools to complete, and the power that grasp a hammer is superior to other synthetic materials. Mechanical performance is better than that of wood. Holding nail force is usually 3 times of wood, particle board is five times.

2) 良好的强度性能

2) good strength properties

　　木塑复合材料内含塑料，因而具有较好的弹性模量。此外，由于内含纤维并经与塑料充分混合，因而具有与硬木相当的抗压、抗弯曲等物理机械性能，并且其耐用性明显优于普通木质材料。表面硬度高，一般是木材的2—5倍。

Wood plastic composite material containing plastic, thus has good elastic modulus. In addition, due to containing fiber and blended with plastic fully, thus has with hardwood considerable physical and mechanical properties such as compressive strength, bending, and its durability is better than the ordinary wooden material. High surface hardness, average 2-5 times that of wood.

3) 具有耐水、耐腐性能，使用寿命长

3) water resistance, corrosion performance, long service life

　　木塑材料及其产品与木材相比，可抗强酸碱、耐水、耐腐蚀，并且不繁殖细菌，不易被虫蛀、不长真菌。使用寿命长，可达50年以上。

Compared with wood wood plastic materials and their products, strong acid and alkali resistance, water resistance, corrosion resistance, and do not breed bacteria, not easy to be eat by moth, not long fungus. Service life is long, can reach more than 50 years.

4) 优良的可调整性能

4) excellent performance can be adjusted

　　通过助剂，塑料可以发生聚合、发泡、固化、改性等改变，从而改变木塑材料的密度、强度等特性，还可以达到抗老化、防静电、阻燃等特殊要求。

With additives, plastic can change polymerization, foaming and curing, modified, which changes of wood-plastics material features such as density, strength, can also achieve the anti-aging, antistatic, flame retardant and other special requirements.

5) 具有紫外线光稳定性、着色性良好。

5) with ultraviolet (uv) light stability, good pigmentation.

6) 其最大优点就是变废为宝，并可100％回收再生产。可以分解，不会造成“白色污染”，是真正的绿色环保产品。

6) the biggest advantage is waste, and reproduction can be 100% recycled. Can be broken down, not cause "white pollution", is the real green environmental protection product.

7) 原料来源广泛

7) raw material sources

　　生产木塑复合材料的塑料原料主要是高密度聚乙烯或聚丙烯，木质纤维可以是木粉、谷糠或木纤维，另外还需要少量添加剂和其他加工助剂。

In the production of wood plastic composite plastic raw materials are mainly high density polyethylene or polypropylene, wood fiber can be wood powder, chaff or wood fiber, also need a small amount of additives and other processing AIDS.

8) 可以根据需要，制成任意形状和尺寸大小

8) can be made into any shape, according to their needs, and size

　　木塑复合材料的缺点是：韧性低于母体塑料，加工设备、下游装置、模具均需作相应调整和改造。

Wood plastic composite defect is: toughness lower than plastic matrix, processing equipment, the downstream equipment, mold all needs to make corresponding adjustment and transformation.