木塑地板安装注意事项

Precautions for the installation of wood plastic floor

1、由于木塑材料本身的密度较大，在使用自攻螺钉的位置均需用钻头引孔，再进行自攻螺钉的紧固。

1. Because of the large density of the wood plastic material itself, the drill hole should be used by the bit in the position of the self tapping screw, and then the self tapping screw is tightened.

2、固定龙骨的要求：要求安装工作面平整，无坑洼，龙骨间距L在300mm～350mm。

2, a fixed keel require the installation work surface is smooth, no potholes, keel spacing L in 300mm ~ 350mm.

3、对于大面积木塑地板的铺装，建议使用图示安装方式，每根木塑地板的长度不超过2米。

3, for the large area of wood plastic floor paving, suggest the use of graphic installation, the length of each wood plastic floor is not more than 2 meters.

4、封边处理

4, edge treatment

5、对于弯道木塑地板的铺装，需根据弯道的长短及角度对每一块木塑地板的两端进行切割后再铺装。

5. For the paving of the wood plastic floor of the bend, it is necessary to cut the ends of each piece of wood plastic floor according to the length and angle of the bend.

6、台阶的木塑地板铺装，对于台阶的阳角建议使用金属压条对木塑地板进行保护。

6, the step of the wood plastic floor paving for the positive angle of the steps to use metal bar to protect the wood plastic floor.

7、在使用过程中，请避免重物的撞击或碰撞。在材料的存储，运输，安装过程中，请注意妥善处理，避免它从高处跌落受损。

7, in the use of the process, please avoid the impact or collision of heavy objects. In the storage, transportation, and installation of the material, please pay attention to the proper treatment to prevent it from falling from the height.