1、木塑地板施工前的准备，施工前要确保施工场地的混凝土基层地面平整。这一点很重要，希望大家不要为了图省事，勉强施工，否则会得不偿失。

Before the construction of wooden floor, make sure the concrete floor level of the construction site is leveled before construction. This is important, I hope you don't want to do it for the sake of the sake of the sake of the construction, or you will lose it.

2、龙骨的中心距离控制在310-410mm之间，龙骨端部对接接缝需留10mm左右的间距，便于排水，同时要做到龙骨排与排之间的端部接缝错开，不要在一条直线上。龙骨间距允许误差<10mm，平整度<3mm，与墙面间的伸缩缝为8-10mm。

2, keel of center distance control between 310-410 - mm, keel end butt joints is about 10 mm spacing, facilitate drainage, at the same time to do keel end joint between row and row stagger, not in a straight line. The spacing of the keel allows the error to be < 10mm, which is the same as the distance between the metope and the metope, which is 8-10mm.

3、施工现场基层地面施工条件差，无法做到正题结构稳定时，需改用钢龙骨代替木塑龙骨，要用镀锌钢，电焊链接的部位要去除焊渣后座防锈处理。

3, construction site at the grassroots level construction ground condition is poor, cannot afford to stable structure, need to use steel keel instead of plastic wood keel, want to use galvanized steel, welding the part of the link to remove welding slag in the back seat antirust processing.

4、地板拼接缝隙的大小，要根据木塑地板安装时环境的温湿度，地板长度，地板含水率，以及铺设面积的具体情况合理确定。

4, the floor mosaics aperture size, according to the temperature and humidity of the wood plastic floor installation environment, the length of the floor, the floor moisture content, and laid the concrete situation of the area are established.